Solar Supplies

The 1,8m VE.Direct Cable from Victron (ASS030530203) is needed to connect devices that should communicate with each other via the VE-Direct port. For example, the BlueSolar controllers and the MPPT Control remote control panel. So the following connections can be made with it: Victron BlueSolar MPPT controller to Victron Color Control GX panel. Victron BlueSolar MPPT controller to MPPT Control remote panelBMV70xxx series to Color Control GX Panel BMV60xxx series to Color Control GX Panel Phoenix Inverter 12V 24V 48V 250W-500W to Color Control GX Panel VE.Direct cables are not included with these device series and are available in lengths from 0.3 to 10m. Scope of delivery:1x Victron ASS030530203 01,8m VE.Direct Cable

WATTSTUNDE® Holding Spoiler Connector Motorhome mounting bracket black for one or more solar modules made of solid ABS plastic.   With these solar connectors, larger solar modules can be fastened absolutely securely and easily. The connectors are suitable either to connect several modules together or to give large modules more stability. Solid holding pillar connectors universal fit UV resistant Weather resistant Made of solid solid plastic Aerodynamic shape prevents driving noise Easy to install with Sikaflex 252i or Betalink K1 adhesive incl. stainless steel screws Manufacturer warranty 20 years The retaining spoilers are bonded to the vehicle roof together with the module, either with Betalink K1 adhesive or Sikaflex 252i construction adhesive. The profiles provide better wind resistance while driving and, due to the distance between the solar module and the mounting surface, optimal rear ventilation of the module. WATTSTUNDE® solar mounts and fasteners differ from many others due to their very high load-bearing capacity and UV and weather-resistant surface sealing. Quality makes the difference, therefore Wattstunde® offers 20 years manufacturer warranty on the mounting spoilers!

WATTSTUNDE® Holding Spoiler Corners Motorhome mounting spoiler corners made of solid ABS solid plastic for mounting solar modules on the vehicle roof. Use these retaining spoiler corners as aerodynamic fasteners for small solar modules or as additional stabilization for larger modules to ensure optimum and secure hold on the roof of your motor home. Solid holding spoiler corners UV resistant Weather resistant Made of solid plastic Aerodynamic shape prevents driving noise Easy to install with Sikaflex 252i or Betalink K1 adhesive incl. stainless steel screws With these solar mounting corners (4 pcs.) solar modules can be mounted absolutely safe and easy. Before mounting and bonding the holding spoilers, the holding spoilers are screwed to the corners of the solar module. Then the profiles are bonded together with the module on the vehicle roof, either with Betalink K1 adhesive or Sikaflex 252i construction adhesive (available in the store). The profiles provide better wind resistance when driving and, due to the distance between the solar module and the mounting surface, optimum rear ventilation of the module. Thus, compared to direct mounting, a significant increase in performance can be achieved by cooling the solar panel. WATTSTUNDE® solar mounts and fasteners stand out from many others due to their very high load-bearing capacity and UV and weather-resistant surface sealing. Quality makes the difference, which is why Wattstunde® offers a 20-year manufacturer's warranty on the mounting spoilers!

Förch K 127 MS-Polymer Power Glue High adhesion, UV resistance, easy processing Förch K 127 is an MS polymer-based glue with high adhesion and high initial strength for structural bonding of components especially for vehicle construction. Its characteristics make it ideal for bonding flexible solar modules to the vehicle housing. MS polymers do not require an extra work step after cleaning. They are applied directly without a primer. The reactive groups are already built into the adhesive sealant, so to speak, which enables fast and easy processing. High initial strength Very good UV resistance and aging properties No special surface treatment Can be painted over after skin formation

WATTSTUNDE® ABS Roof Duct One Input   For gluing to the vehicle roof with PG screw connection for a cable gland The ABS roof duct is simply bonded to the vehicle roof with Betalink K1 or Sikaflex adhesive 252i. The PG glands can squeeze a maximum cable diameter of 12mm and a minimum cable diameter of 4mm. One cable input With PG gland Made of ABS plastic Aerodynamic shape prevents driving noise Black and inconspicuous Can be mounted with Sikaflex or Betalink K1 adhesive UV and weather resistant Holds cables with a diameter of 4mm - 12mm tightly Dimensions approx. L 13 x W 4.5 x H 4 cm The WATTSTUNDE® roof ducts promise top safety. They are both UV and weather resistant and absolutely waterproof (IP68 standard). The PG safety cable glands ensure flush and gap-free sheathing of the cables, so that the penetration of dirt and water can be ruled out. The roof ducts round off your motorhome mounting system consisting of retaining spoilers, mounting corners and connectors and enable a solid mounting of your solar island system on the vehicle roof and a safe introduction of the cables into the living space.

WATTSTUNDE® ABS Roof Bushing Two Inputs   For gluing to the vehicle roof with PG screw connection for cable entry The ABS roof gland is simply glued to the vehicle roof with our Betalink K1 or Sikaflex adhesive 252i. The PG glands can squeeze a maximum cable diameter of 12mm and a minimum cable diameter of 4mm. Two cable inputs With PG gland Made of ABS plastic Aerodynamic shape prevents driving noise Can be mounted with Sikaflex or Betalink K1 adhesive UV and weather resistant Holds cables with a diameter of 4mm - 12mm tightly Dimensions approx. L 13 x W 9.5 x H 4 cm The WATTSTUNDE® roof bushings promise top safety. They are both UV and weather resistant and absolutely waterproof (IP68 standard). The PG safety cable glands ensure flush and gap-free sheathing of the cables, so that the penetration of dirt and water can be ruled out. The roof ducts round off your motorhome mounting system consisting of retaining spoilers, mounting corners and connectors and enable a solid mounting of your solar island system on the vehicle roof and a safe introduction of the cables into the living space.

WATTSTUNDE® Holding Spoiler Connector Motorhome mounting bracket white for one or more solar modules made of solid ABS plastic.   With these solar connectors, larger solar modules can be fastened absolutely securely and easily. The connectors are suitable either to connect several modules together or to give large modules more stability. Solid holding pillar connectors universal fit UV resistant Weather resistant Made of solid plastic Aerodynamic shape prevents driving noise Easy to install with Sikaflex 252i or Betalink K1 adhesive incl. stainless steel screws Manufacturer warranty 20 years The retaining spoilers are bonded to the vehicle roof together with the module, either with Betalink K1 adhesive or Sikaflex 252i construction adhesive. The profiles provide better wind resistance while driving and, due to the distance between the solar module and the mounting surface, optimal rear ventilation of the module.WATTSTUNDE® solar mounts and fasteners differ from many others based on their very high load-bearing capacity and UV and weather-resistant surface sealing. Quality makes the difference, therefore Wattstunde® offers 20 years manufacturer warranty on the mounting spoilers!

MC4 compatible Y-connector set - for parallel connection of 2 solar modules Interconnect several modules easily with the Multi Contact Principle (MC) With the MC4 connector system, module interconnections are child's play. The MC4 connectors (+ and -) are ideally suited to connect 2 modules in parallel. Due to the simple click and plug system (Snap-In) the handling of the Multicontact connectors is very easy and no further cable fumbling is necessary. Save yourself from an unnecessary cable tangle with the connectors and connect your modules in parallel. The plugs save unnecessary cable lengths to the connections. The plugs have one of the highest protection classes IP67 and are extremely durable, weatherproof and resistant. The connectors are always supplied as a set. MC4 Y connector set Rated current max. 30A System voltage max. 1000V Protection class plugged IP67 Protection class II Locking system "Snap-In" Temperature resistant -40°C to +90°C Weather resistant 

MC4 compatible Y-connector set - for parallel connection of 2 solar modules Interconnect several modules easily with the Multi Contact Principle (MC) With the MC4 connector system, module interconnections are child's play. The MC4 connectors (+ and -) are ideally suited to connect 2 modules in parallel. Due to the simple click and plug system (Snap-In) the handling of the Multicontact connectors is very easy and no further cable fumbling is necessary. Save yourself from an unnecessary cable tangle with the connectors and connect your modules in parallel. The plugs save unnecessary cable lengths to the connections. The plugs have one of the highest protection classes IP67 are extremely durable, weatherproof and resistant. The connectors are always delivered as a set. MC4 Y connector set Rated current max. 30A System voltage max. 1000V Protection class plugged IP67 Protection class II Locking system "Snap-In" Temperature resistant -40°C to +90°C Conductor cross section 4mm² Weather resistant 

The 1.8m VE.Direct Cable from Victron is needed to connect devices that should communicate with each other via the VE-Direct port. For example, the BlueSolar controllers and the MPPT Control remote control panel. So the following connections can be made with it: Victron BlueSolar MPPT controller to Victron Color Control GX panel. Victron BlueSolar MPPT controller to MPPT Control remote panelBMV70xxx series to Color Control GX Panel BMV60xxx series to Color Control GX Panel Phoenix Inverter 12V 24V 48V 250W-500W to Color Control GX Panel VE.Direct cables are not included with these device series and are available in lengths from 0.3 to 10m. Scope of delivery:1x Victron ASS030530203 1,8m VE.Direct Cable

WATTSTUNDE® Solar Holding Spoiler Set Motorhome mounting spoiler for solar modules made of solid ABS all-plastic   The WATTSTUNDE® solar module holders give you the opportunity to mount your modules safely, efficiently and elegantly on your vehicle roof. 2 spoilers in a set Length: 68cm suitable for many solar modules from 50-120 watts Easy to mount UV and ozone resistant Aerodynamic shape prevents driving noise Can be mounted with Sikaflex 252i or Betalink K1 adhesive Extremely weather resistant incl. stainless steel screws Manufacturer warranty 20 years With these aerodynamic brackets you can safely and easily mount your solar modules  even without previous knowledge. The brackets have drill holes on both sides of the support surfaces. The modules can be glued or screwed to the holding spoilers. When screwing the modules, they can be removed again without further ado if necessary. For bonding, we recommend the strong construction adhesive Sikaflex 252i or Betalink K1 for a strong adhesive result. We explicitly advise against using any sealants for bonding! The profiles ensure better wind resistance when driving and, due to the distance between the solar module and the mounting surface, optimal rear ventilation of the module. Thus, compared to direct mounting, a significant increase in performance can be achieved by cooling the solar panel. An investment that pays off! Quality makes the difference, which is why Wattstunde® offers a 20-year manufacturer's warranty on the retaining spoilers! The WATTSTUNDE® holding spoiler systems and roof penetrations are different from many others due to their very high load-bearing capacity as well as the UV and weather-resistant surface sealing. The elegant appearance of the retaining spoiler in combination with the module creates a sophisticated image on your vehicle roof.

WATTSTUNDE® Solar Holding Spoiler Set Motorhome mounting spoiler for solar modules made of solid ABS all-plastic The WATTSTUNDE® solar module holders give you the opportunity to mount your modules safely, efficiently and elegantly on your vehicle roof. 2 spoilers in a set Length: 53cm suitable for many solar modules from 50-120 watts Easy to mount UV and ozone resistant Aerodynamic shape prevents driving noise Can be mounted with Sikaflex 252i or Betalink K1 adhesive Extremely weather resistant incl. stainless steel screws Manufacturer warranty 20 years With these aerodynamic brackets you can mount safely and easily your solar modules even without previous knowledge. The brackets have drill holes on both sides of the support surfaces. The modules can be glued or screwed to the holding spoilers. When screwing the modules, they can be removed again without further ado if necessary. For bonding, we recommend the strong construction adhesive Sikaflex 252i or Betalink K1 for a strong adhesive result. We explicitly advise against using any sealants for bonding! The profiles ensure better wind resistance when driving and, due to the distance between the solar module and the mounting surface, optimal rear ventilation of the module. Thus, compared to direct mounting, a significant increase in performance can be achieved by cooling the solar panel. An investment that pays off! Quality makes the difference, which is why Wattstunde® offers a 20-year manufacturer's warranty on the retaining spoilers! The WATTSTUNDE® holding spoiler systems and roof penetrations are different from many others due to their very high load-bearing capacity as well as the UV and weather-resistant surface sealing. The elegant appearance of the retaining spoiler in combination with the module creates a sophisticated image on your vehicle roof.

WATTSTUNDE® Holding Spoiler Corners Motorhome mounting spoiler corners made of solid ABS solid plastic for mounting solar modules on the vehicle roof. Use these retaining spoiler corners as aerodynamic fasteners for small solar modules or as additional stabilization for larger modules to ensure optimum and secure hold on the roof of your motor home. Solid holding spoiler corners UV resistant Weather resistant Made of solid solid plastic Aerodynamic shape prevents driving noise Easy to install with Sikaflex 252i or Betalink K1 adhesive incl. stainless steel screws With these solar mounting corners (4 pcs.) solar modules can be mounted absolutely safe and easy. Before mounting and bonding the holding spoilers, the holding spoilers are screwed to the corners of the solar module. Then the profiles are bonded together with the module on the vehicle roof, either with Betalink K1 adhesive or Sikaflex 252i construction adhesive (available in the store). The profiles provide better wind resistance when driving and, due to the distance between the solar module and the mounting surface, optimum rear ventilation of the module. Thus, compared to direct mounting, a significant increase in performance can be achieved by cooling the solar panel. WATTSTUNDE® solar mounts and fasteners stand out from many others due to their very high load-bearing capacity and UV and weather-resistant surface sealing. Quality makes the difference, which is why Wattstunde® offers a 20-year manufacturer's warranty on the mounting spoilers!

MC4 compatible plug set - socket + plug With the connector system module interconnections are child's play. MC4 compatible plug connectors for photovoltaic systems for time-saving and reliable wiring of PV modules. The use of this solar connector saves you time and work. This set consists of one male and one female connector with their respective inner workings. Other special features: Cable cross section 4 - 6mm² System voltage max. 1000V Contact protection Locking system snap-in Contact material copper, tin-plated Flame class UL94-V0 protection class II Cable strain relief according to IEC61984 

With the VE.Direct to Bluetooth Smart Dongle you can display your BMV or MPPT information on iOS and Android devices. You will need the VictronConnect app for this. Receive information like battery status, solar module energy and other useful data displayed wirelessly. The dongle can read data from all products with VE.Direct port. These include, for example, BMV-70x series battery monitors, Phoenix inverters with VE.Direct port and MPT solar charge controllers.

MC4 compatible T-connector set - for parallel connection of 3 solar modules Interconnect several modules easily with the Multi Contact Principle (MC) With the MC4 connector system, module interconnections are child's play. The MC4 connectors (+ and -) are ideally suited to connect 3 modules in parallel. Due to the simple click and plug system (Snap-In) the handling of the Multicontact connectors is very easy and no further cable fumbling is necessary. Save yourself from an unnecessary cable tangle with the connectors and connect your modules in parallel. The plugs save unnecessary cable lengths to the connections. The plugs have one of the highest protection classes IP67 are extremely durable, weatherproof and resistant. The plugs are suitable for cable cross sections of 4 - 6mm² and are always delivered as a set. MC4 T connector set Rated current max. 30A System voltage max. 1000V Protection class plugged IP67 Protection class II Locking system "Snap-In" Temperature resistant -40°C to +90°C Conductor cross section 4 - 6mm² Weather resistant

WATTSTUNDE® Solar Holding Spoiler Set Motorhome mounting spoiler for solar modules made of solid ABS all-plastic   The WATTSTUNDE® solar module holders give you the opportunity to mount your modules safely, efficiently and elegantly on your vehicle roof. 2 spoilers in a set Length: 53cm suitable for many solar modules from 50-120 watts Easy to mount UV and ozone resistant Aerodynamic shape prevents driving noise Can be mounted with Sikaflex 252i or Betalink K1 adhesive Extremely weather resistant incl. stainless steel screws Manufacturer warranty 20 years With these aerodynamic brackets you can mount your solar modules absolutely safe and easy even without previous knowledge. The brackets have drill holes on both sides of the support surfaces. The modules can be glued or screwed to the holding spoilers. When screwing the modules, they can be removed again without further ado if necessary. For bonding, we recommend the strong construction adhesive Sikaflex 252i or Betalink K1 for a strong adhesive result. We explicitly advise against using any sealants for bonding! The profiles ensure better wind resistance when driving and, due to the distance between the solar module and the mounting surface, optimal rear ventilation of the module. Thus, compared to direct mounting, a significant increase in performance can be achieved by cooling the solar panel. An investment that pays off! Quality makes the difference, which is why Wattstunde® offers a 20-year manufacturer's warranty on the retaining spoilers! The WATTSTUNDE® holding spoiler systems and roof penetrations are different from many others due to their very high load-bearing capacity as well as the UV and weather-resistant surface sealing. The elegant appearance of the retaining spoiler in combination with the module creates a sophisticated image on your vehicle roof.

WATTSTUNDE® ABS Roof Duct Two Entrances   For gluing to the vehicle roof with PG screw connection for cable input The ABS roof gland is simply glued to the vehicle roof with our Betalink K1 or Sikaflex adhesive 252i. The PG glands can squeeze a maximum cable diameter of 12mm and a minimum cable diameter of 4mm. Two cable inputs With PG gland Made of ABS plastic Aerodynamic shape prevents driving noise Can be mounted with Sikaflex or Betalink K1 adhesive UV and weather resistant Holds cables with a diameter of 4mm - 12mm tightly Dimensions approx. L 13 x W 9.5 x H 4 cm The WATTSTUNDE® roof ducts promise top safety. They are both UV and weather resistant and absolutely waterproof (IP68 standard). The PG safety cable glands ensure flush and gap-free sheathing of the cables, so that the penetration of dirt and water can be ruled out. The roof bushings round off your motorhome mounting system consisting of retaining spoilers, mounting corners and connectors and enable a solid mounting of your solar island system on the vehicle roof and a safe introduction of the cables into the living space.

WATTSTUNDE® Solar Holding Spoiler Set   Motorhome mounting spoiler for solar modules made of solid ABS all-plastic The WATTSTUNDE® solar module holders give you the opportunity to mount your modules safely, efficiently and elegantly on your vehicle roof. 2 spoilers in a set Length: 68cm suitable for many solar modules from 50-120 watts Easy to mount UV and ozone resistant Aerodynamic shape prevents driving noise Can be mounted with Sikaflex 252i or Betalink K1 adhesive Extremely weather resistant incl. stainless steel screws Manufacturer warranty 20 years With these aerodynamic brackets you can mount your solar modules absolutely safe and easy even without previous knowledge. The brackets have drill holes on both sides of the support surfaces. The modules can be glued or screwed to the holding spoilers. When screwing the modules, they can be removed again without further ado if necessary. For bonding, we recommend the strong construction adhesive Sikaflex 252i or Betalink K1 for a strong adhesive result. We explicitly advise against using any sealants for bonding! The profiles ensure better wind resistance when driving and, due to the distance between the solar module and the mounting surface, optimal rear ventilation of the module. Thus, compared to direct mounting, a significant increase in performance can be achieved by cooling the solar panel. An investment that pays off! Quality makes the difference, which is why Wattstunde® offers a 20-year manufacturer's warranty on the retaining spoilers! The WATTSTUNDE® holding spoiler systems and roof penetrations are different from many others due to their very high load-bearing capacity as well as the UV and weather-resistant surface sealing. The elegant appearance of the retaining spoiler in combination with the module creates a sophisticated image on your vehicle roof.

WATTSTUNDE® ABS Roof Duct One Input   For gluing to the vehicle roof with PG screw connection for a cable entry. The ABS roof duct is simply bonded to the vehicle roof with Betalink K1 or Sikaflex adhesive 252i. The PG glands can squeeze a maximum cable diameter of 12mm and a minimum cable diameter of 4mm. One cable input With PG gland Made of ABS plastic Aerodynamic shape prevents driving noise Black and inconspicuous Can be mounted with Sikaflex or Betalink K1 adhesive UV and weather resistant Holds cables with a diameter of 4mm - 12mm tightly Dimensions approx. L 13 x W 4.5 x H 4 cm The WATTSTUNDE® roof bushings promise top safety. They are both UV and weather resistant and absolutely waterproof (IP68 standard). The PG safety cable glands ensure flush and gap-free sheathing of the cables, so that the penetration of dirt and water can be ruled out. The roof bushings round off your motorhome mounting system consisting of retaining spoilers, mounting corners and connectors and enable a solid mounting of your solar island system on the vehicle roof and a safe introduction of the cables into the living space.