Chargers

DC-DC Charger Orion-Tr Smart DC/DC charger, galv. insulated Suitable for Bluetooth SmartMonitoring, changing settings and updating the charger when new software functions become available can be done with any Bluetooth enabled smartphone, tablet or other device. Fully programmable Battery charging algorithm (configurable) or fixed output. Intelligent generator compatibility: engine run detection. Adaptive 3-stage charging algorithm: constant current -constant voltage -maintenance. For lead acid batteries, it is important to keep the recording time short during shallow discharges to avoid overcharging the battery. After a deep discharge, the constant voltage duration is automatically extended to ensure that the battery fully charges.For lithium batteries, the recording time is fixed, by default 2 hours.Alternatively, a fixed output voltage can be selected. Remote on/off A remote on/off switch or relay contact can be connected to the two-pin connector. Alternatively, the H (right) terminal of the two-pin plug can be connected to a battery positive terminal or the L (left) terminal of the two-pin plug can be connected to the battery negative terminal (or to the body of a vehicle, for example).All models are short-circuit proof and can be connected in parallel to increase output current. An unlimited number of units can be connected in parallel. Overtemperature protectionThe output current is reduced at high ambient temperatures. Protection class IP43 When the screw terminals on the device are installed facing downwards. Screw terminals No special tools are required for installation. Input fuse (not replaceable)  

Powerful battery charger from Victron for 24V batteries with wireless monitoring function. Ready for Bluetooth Smart The Blue Smart IP22 battery charger is the wireless solution for monitoring voltage and current, adjusting settings and updating the charger when new features are available.Simply download the app to your smartphone and connect to the battery charger via Bluetooth. High efficiency With up to 94% efficiency, these chargers generate up to four times less heat compared to the industry standard. Also, after the battery is fully charged, power consumption drops to less than 0.5 watts, which is about five to ten times better than the industry standard. Adaptive 6-stage charging algorithm: Test- Bulk - Absorption - Recondition - Float - Storgage. The Blue Smart charger features microprocessor-controlled adaptive battery management. Adaptive means that the charging process is automatically adapted to the type of battery use. Storage mode: Less maintenance and aging when the battery is not in use:Storage mode is activated whenever there has been no discharge within 24 hours. The charge maintenance voltage is then lowered to 2.2V/cell (13.2V for a 12V battery) to minimize gas generation and thus prevent corrosion on the positive plates. Once a week, the voltage is increased to the level of the gassing voltage. This provides a type of equalization charge that prevents electrolyte stratification and sulfation, the two main causes of premature battery failure. Also charges lithium-ion (LiFePO4) batteries LiFePO4 batteries are charged with a simple constant current phase ? Constant voltage phase ? Charge maintenance voltage phase algorithm. The NIGHT and LOW settings When the charger is in NIGHT or LOW mode, the output current is reduced to a maximum of 25% of the rated output and the charger operates absolutely silently. The NIGHT mode ends automatically after 8 hours. The LOW mode can be terminated manually. Protection against overheating The output current is reduced when the temperature rises up to 50°C, but the Blue Smart charger does not fail.

The Blue Power IP22 battery charger 12V 20A with an efficiency up to 94%. Up to four times less heat generation than the industry standard. Adaptive 6-stage charging algorithm: Test, Bulk, Absorption, Recondition, Float, Storgage.

Powerful battery charger from Victron for 24V batteries with wireless monitoring function. Ready for Bluetooth Smart The Blue Smart IP67 battery charger is the wireless solution for monitoring voltage and current, adjusting settings and updating the charger when new features are available.Simply download the app to your smartphone and connect to the battery charger via Bluetooth. High efficiency With up to 94% efficiency, these chargers generate up to four times less heat compared to the industry standard. Also, after the battery is fully charged, power consumption drops to less than 0.5 watts, which is about five to ten times better than the industry standard. Adaptive 6-stage charging algorithm: Test- Bulk - Absorption - Recondition - Float - Storgage. The Blue Smart charger features microprocessor-controlled adaptive battery management. Adaptive means that the charging process is automatically adapted to the type of battery use. Storage mode: Less maintenance and aging when the battery is not in use:Storage mode is activated whenever there has been no discharge within 24 hours. The charge maintenance voltage is then lowered to 2.2V/cell (13.2V for a 12V battery) to minimize gas generation and thus prevent corrosion on the positive plates. Once a week, the voltage is increased to the level of the gassing voltage. This provides a type of equalization charge that prevents electrolyte stratification and sulfation, the two main causes of premature battery failure. Also charges lithium-ion (LiFePO4) batteries LiFePO4 batteries are charged with a simple constant current phase ? Constant voltage phase ? Charge maintenance voltage phase algorithm. The NIGHT and LOW settings When the charger is in NIGHT or LOW mode, the output current is reduced to a maximum of 25% of the rated output and the charger operates absolutely silently. The NIGHT mode ends automatically after 8 hours. The LOW mode can be terminated manually. Protection against overheating The output current is reduced when the temperature rises up to 50°C, but the Blue Smart charger does not fail.

Battery ChargersBlue Power IP67   Blue Power IP 67 charger 12/25 230V Fully encased: waterproof, shockproof and fire retardant. Water, oil or dirt cannot damage the Blue Power IP67 charger. The case is made of cast aluminum and the electronics are coated with resin. Start interruption The models with addition (1+Si) have a second current-limited output which is always powered as long as 180 - 265 V AC is available as an input. This output can be used, for instance, to prevent a vehicle from being started before the battery charger has been disconnected (start interrupt function). Highest charging efficiency ever! A new industry standard is set: with an efficiency of 92% or even higher, these chargers waste three to four times less heat. Also, after the battery is fully charged, the power consumption drops to less than one watt, which is about five to ten times better than the industry standard.

Battery ChargersBlue Power IP67   Blue Power IP 67 charger Fully encased: waterproof, shockproof and fire retardant. Water, oil or dirt cannot damage the Blue Power IP67 charger. The case is made of cast aluminum and the electronics are coated with resin. Start interruption The models with addition (1+Si) have a second current-limited output which is always powered as long as 180 - 265 V AC is available as an input. This output can be used, for instance, to prevent a vehicle from being started before the battery charger has been disconnected (start interrupt function). Highest charging efficiency ever! A new industry standard is set: with an efficiency of 92% or even higher, these chargers waste three to four times less heat. Also, after the battery is fully charged, the power consumption drops to less than one watt, which is about five to ten times better than the industry standard.

Battery ChargersBlue Power IP22 High efficiency With up to 94% efficiency, these chargers generate up to four times less heat compared to the industry standard. Also, after the battery is fully charged, power consumption drops to less than 0.5 watts, which is about five to ten times better than the industry standard. Adaptive 6-stage charging algorithm The Blue Power charger features a microprocessor-controlled adaptive battery management. Adaptive means that the charging process is automatically adjusted to the type of battery usage. Storage mode: less maintenance and aging when the battery is not in use Storage mode is activated whenever there has been no discharge within 24 hours. The charge maintenance voltage is then lowered to 2.2V/cell (13.2V for a 12V battery) to minimize gas generation and thus prevent corrosion on the positive plates. Once a week, the voltage is increased to the level of the gassing voltage. This provides a type of equalization charge that prevents electrolyte stratification and sulfation, the two main causes of premature battery failure. Also charges lithium-ion (LiFePO4) batteries LiFePO4 batteries are charged using a simple constant current phase > constant voltage phase > charge retention voltage phase algorithm. The NIGHT and LOW settings When the unit is in NIGHT or LOW mode, the output current is reduced to a maximum of 25% of the rated output and the charger operates absolutely silently. The NIGHT mode ends automatically after 8 hours. The LOW mode can be terminated manually. Protection against overheating The output current is reduced when the temperature rises up to 50°C, but the Blue Power charger does not fail.

Battery ChargersBlue Power IP22 High efficiency With up to 94% efficiency, these chargers generate up to four times less heat compared to the industry standard. Also, after the battery is fully charged, power consumption drops to less than 0.5 watts, which is about five to ten times better than the industry standard. Adaptive 6-stage charging algorithm The Blue Power charger features a microprocessor-controlled adaptive battery management. Adaptive means that the charging process is automatically adjusted to the type of battery usage. Storage mode: less maintenance and aging when the battery is not in use Storage mode is activated whenever there has been no discharge within 24 hours. The charge maintenance voltage is then lowered to 2.2V/cell (13.2V for a 12V battery) to minimize gas generation and thus prevent corrosion on the positive plates. Once a week, the voltage is increased to the level of the gassing voltage. This provides a type of equalization charge that prevents electrolyte stratification and sulfation, the two main causes of premature battery failure. Also charges lithium-ion (LiFePO4) batteries LiFePO4 batteries are charged using a simple constant current phase > constant voltage phase > charge retention voltage phase algorithm. The NIGHT and LOW settings When the unit is in NIGHT or LOW mode, the output current is reduced to a maximum of 25% of the rated output and the charger operates absolutely silently. The NIGHT mode ends automatically after 8 hours. The LOW mode can be terminated manually. Protection against overheating The output current is reduced when the temperature rises up to 50°C, but the Blue Power charger does not fail.

Battery Chargers Blue Power IP67   Blue Power IP 67 charger 12/17 230V Fully encased: waterproof, shockproof and fire retardant. Water, oil or dirt cannot damage the Blue Power IP67 charger. The case is made of cast aluminum and the electronics are coated with resin. Start interruption The models with addition (1+Si) have a second current-limited output whichis always powered as long as 180 - 265 V AC is available an an input. This output can be used, for instance, to prevent a vehicle from being started before the battery charger has been disconnected (start interrupt function). Highest charging efficiency ever! A new industry standard is set: with an efficiency of 92% or even higher, these chargers waste three to four times less heat. Also, after the battery is fully charged, the power consumption drops to less than one watt, which is about five to ten times better than the industry standard.

Battery Chargers Blue Power IP67   Blue Power IP 67 charger Fully encased: waterproof, shockproof and fire retardant. Water, oil or dirt cannot damage the Blue Power IP67 charger. The case is made of cast aluminum and the electronics are coated with resin. Start interruption The models with addition (1+Si) have a second current-limited output which is always powered as long as 180 - 265 V AC is available as an input. This output can be used, for instance, to prevent a vehicle from being started before the battery charger has been disconnected (start interrupt function). Highest charging efficiency ever! A new industry standard is set: with an efficiency of 92% or even higher, these chargers waste three to four times less heat. Also, after the battery is fully charged, the power consumption drops to less than one watt which is about five to ten times better than the industry standard.

Battery Chargers Blue Power IP67   Blue Power IP 67 charger 24/12 230V Fully encased: waterproof, shockproof and fire retardant. Water, oil or dirt cannot damage the Blue Power IP67 charger. The case is made of cast aluminum and the electronics are coated with resin. Start interruption The models with addition (1+Si) have a second current-limited output which is always powered as long as 180 - 265 V AC is available as an input. This output can be used, for instance, to prevent a vehicle from being started before the battery charger has been disconnected (start interrupt function). Highest charging efficiency ever! A new industry standard is set: with an efficiency of 92% or even higher, these chargers waste three to four times less heat. Also, after the battery is fully charged, the power consumption drops to less than one watt, which is about five to ten times better than the industry standard.

High efficiency With up to 94% efficiency, these chargers generate up to four times less heat compared to the industry standard. Also, after the battery is fully charged, power consumption drops to less than 0.5 watts, which is about five to ten times better than the industry standard. Adaptive 6-stage charging algorithm The Blue Power charger features a microprocessor-controlled adaptive battery management. Adaptive means that the charging process is automatically adjusted to the type of battery usage. Storage mode: less maintenance and aging when the battery is not in use Storage mode is activated whenever there has been no discharge within 24 hours. The charge maintenance voltage is then lowered to 2.2V/cell (13.2V for a 12V battery) to minimize gas generation and thus prevent corrosion on the positive plates. Once a week, the voltage is increased to the level of the gassing voltage. This provides a type of equalization charge that prevents electrolyte stratification and sulfation, the two main causes of premature battery failure. Also charges lithium-ion (LiFePO4) batteries LiFePO4 batteries are charged using a simple constant current phase > constant voltage phase > charge retention voltage phase algorithm. The NIGHT and LOW settings When the unit is in NIGHT or LOW mode, the output current is reduced to a maximum of 25% of the rated output and the charger operates absolutely silently. The NIGHT mode ends automatically after 8 hours. The LOW mode can be terminated manually. Protection against overheating The output current is reduced when the temperature rises up to 50°C, but the Blue Power charger does not fail.

Battery ChargersBlue Power IP22 High efficiency With up to 94% efficiency, these chargers generate up to four times less heat compared to the industry standard. Also, after the battery is fully charged, power consumption drops to less than 0.5 watts, which is about five to ten times better than the industry standard. Adaptive 6-stage charging algorithm The Blue Power charger features a microprocessor-controlled adaptive battery management. Adaptive means that the charging process is automatically adjusted to the type of battery usage. Storage mode: less maintenance and aging when the battery is not in use Storage mode is activated whenever there has been no discharge within 24 hours. The charge maintenance voltage is then lowered to 2.2V/cell (13.2V for a 12V battery) to minimize gas generation and thus prevent corrosion on the positive plates. Once a week, the voltage is increased to the level of the gassing voltage. This provides a type of equalization charge that prevents electrolyte stratification and sulfation, the two main causes of premature battery failure. Also charges lithium-ion (LiFePO4) batteries LiFePO4 batteries are charged using a simple constant current phase > constant voltage phase > charge retention voltage phase algorithm. The NIGHT and LOW settings When the unit is in NIGHT or LOW mode, the output current is reduced to a maximum of 25% of the rated output and the charger operates absolutely silently. The NIGHT mode ends automatically after 8 hours. The LOW mode can be terminated manually. Protection against overheating The output current is reduced when the temperature rises up to 50°C, but the Blue Power charger does not fail.

Victron Orion XS 12/12-50A DC-DC battery charger ORI121217040 Spannungswandler mit Ladefunktion für 12V Fahrzeugbatterien Auch geeignet für Euro 5 und Euro 6 MotorenEingangsspannungsbereich 9-17V Ausgangsspannung regulierbar 10-17V Max. Ladestrom: 50A Ladeparameter für alle Akkuarten anpassbar Bluetooth Schnitstelle VE.direct Schnitstelle 3x Status LED-Anzeigen Abmessungen LxHxT: 123x137x40mm

Victron Orion-Tr Smart isolated DC-DC Charger 12/12-18A ORI121222120 Voltage converter with battery charging function for 12V alternators with 12V surface-mounted batteries Input voltage 8 - 17V Output voltage: 10 - 15V/ 18A (220W) adjustable via smartphone Galvanic separation between input and output voltage Charging booster also suitable for operation of lithium batteries Charging only with running alternator, no discharge of starter battery 2x status LED displays